Electronic Ballast for High Output or Standard output UV lamps
Preheat start Ballast  SX06-425-40  
AC220-240v    50/60Hz    
164*38*29mm                                 
Lamp Power:21~40W                                     
Lamp Type:GPH436T5  GPH793T5  GPH843T5          
            TUV36T5   TUV25WT5  TUVPL-L36W
Lamp current:0.38-0.43A                                        

Installation  Requirement
LED   Specification:VF=1.8-3.6v  IF=5-20mA
Max.cable length between the ballast and the lamp:1.5m.

Mounting Restrictions
Disconnect input power before installing or servicing
Ballast case must be grounded
Don't short any two wires of the input and output wires
For indoor use only

Features
For opplications with less than one switch-on cycle per day
(otherwise preheat start ballasts are recommended)
Lamp status indication via DC signal output
(Connected LED Requirement)
DC 5V±5%(5mA):lamp on
DCOV:lamp fault or no lamp

Applications
All areas of applications include UVlamps
=>Air purification
=>Aquarium
=>Industrial water treatment

Certificate Display



Packaging & Shipping